Demolition of a partially load-bearing partition in Villeneuve-Loubet. Reinforcement with a timber structure.

06161 Villeneuve-Loubet

Our company OUVERTURE MURS PORTEURS TREMIES recently demolished a partially load-bearing partition in an apartment in Villeneuve-Loubet. The aim of the demolition was to enlarge the living space. This time, the structural engineering office prescribed a scheme to strengthen the new opening using timber elements. A timber structure is a good alternative to a steel one, especially in buildings that are already built of wood.

First, we began the works by protecting the premises with a special self-adhesive site sheeting. Next, we installed props to support the ceiling while the wall was being taken down.

After demolishing the partition, we built reinforced concrete padstones to support the new timber beam on one side. On the other side, the beam rests on the column and is connected to it with metal joist hangers. The beam was then wedged against the wall to create the maximum bearing. A general clean-up was carried out at the end of the job.

Demolition of a partially load-bearing partition in Villeneuve-Loubet. Reinforcement with a timber structure.

06161 Villeneuve-Loubet

Similar articles

Enlarging openings in facade walls in Antibes.

Enlarging openings in facade walls in Antibes.

OMPT GROUPE worked in Antibes to enlarge the openings in a load-bearing facade of an apartment. The project aimed to create wider openings to [let in more light, open up the view outside, install large glazed bays. A...